Publications

BIBLIOGRAPHY OF ALL PUBLICATIONS
RESULTING FROM CENTER RESEARC

Journal Articles

  1. Shin, J., Li, P., and Mazumder, J. Pulsed laser deposition of yttria stabilized zirconia (YSZ) thin films, Journal of Materials Research. Submitted Dec. 2006.
  2. Dasgupta, A. K., and J. Mazumder. “Effect of Processing Parameters on Zero-gap Laser Welds made on Zinc-coated Steel.” Presented at ICALEO 2006, Oct. 30-Nov.2, 2006, Scottsdale, AZ
  3. Kam, D. and Mazumder, J. 3-D bio-mimetic micro-channel network by laser direct writing, Journal of Laser Applications. Submitted Oct. 2006.
  4.  Dasgupta, A. and Mazumder, J., A novel method for lap welding of automotive sheet steel using high power CW CO2 laser, presented at ALAC Ann Arbor MI September 2005, LAMP Kyoto Japan May 2006.
  5. Dasgupta, A. and Mazumder, J., Laser welding of AM60 magnesium alloy, TMS Annual Meeting, Charlotte NC, March 2004.
  6. Dutta, B., Palaniswamy, S., Choi, J., Song, L., J. Mazumder,  Direct Metal Deposition,  Advanced Materials and Processes, May 2011, Issue 5, pp. 33 – 36.
  7. Song, L., Singh, V., Dutta, B., J. Mazumder, Control of melt pool temperature and deposition height during direct metal deposition process, International Journal Advanced Manufacturing Technology, DOI 10.1007/s00170-011-3395-2.
  8. Sun, G.F., Liu, C.S., Song, L.J., J. Mazumder, Microstructure and Wear Behavior of Laser-Aided Direct Metal Deposited Co-285 and Co-285 + WC Coatings, Metallurgical and Materials Transactions A, 14th April, 2010 41: 1592-1603 (SCI).
  9. Sun, G.F., Bhattacharya, S., Dinda, G.P., Dasgupta, A. J. Mazumder, Microstructure Evolution During Laser-Aided Direct Metal Deposition of Alloy Tool Steel, Scripta Materialia, 2011, 64:  454-457 (SCI).
  10. Sun, G.F., Bhattacharya, S., Dinda, G.P., Dasgupta, A., J. Mazumder, Influence of Processing Parameters on Lattice Parameters in Laser Deposition Tool Alloy Steel, Materials Science and Engineering:  A, 2011, accepted for publication.
  11. Lijun Song, Jyoti Mazumder,  Feedback control of melt pool temperature during laser cladding process, IEEE Transaction on Control Systems and Technology, DOI 10.1109/TCST.2010.2093901.
  12. Bhattacharya, S., Dinda, G.P., Dasgupta, A.K.,  J. Mazumder, Microstructural evolution of AISI 4340 steel during Direct Metal Deposition Process, Materials Science and Engineering: A, Volume 528, Issue 6, 15 March 2011, Pages 2309-2318.
  13. Imran, M.K., Masood,  S.H., Brandt, M., Bhattacharya, S., Jyotirmoy Mazumder, Direct metal deposition (DMD) of H13 tool steel on copper alloy substrate:  Evaluation of mechanical properties, Materials Science and Engineering: A, In Press, Corrected Proof, Available, online 4 January 2011
  14. Bhattacharya, S., Dinda, G.P., Dasgupta, A.K., Dutta, B., Natu, H., J. Mazumder, Microstructural evolution and mechanical, and corrosion property evaluation of Cu-30Ni alloy formed by Direct Metal Deposition process, Journal of Alloys and Compounds, 509 (2011) 6364-6373 
  15. Ogabujynar G., S. Manjini, P. Dutta, et al.,  “Characterization of a continuous CO2 laser-welded Fe-Cu dissimilar couple”,  Metallurgical and Materials Transactions A—Physical Metallurgy and Materials Science, Vol 36A (8) pp 2137-2147 August 2005.
  16. Morrow, W. R., H. Q1, I. Kim, J. Mazumder and S. J. Skerlos,  “Environmental Aspects of Laser-Based and Conventional Tools and Die Manufacturing”, Accepted for publication to the Journal of Cleaner Production.
  17. Lim, Daniel J., Hyungson Ki, and Jyoti Mazumder, “Mass Removal Modes in the Laser Ablation of Silicon by a Q-switched Diode-pumped Solid-state Laser (DPSSL)”, Journal of Physics D: Applied Physics, Vol 39, pp 2624-2635, 2006.
  18. Qi, H., J. Mazumder and H. Ki, “Numerical simulation of heat transfer and fluid flow in coaxial laser cladding process for direct metal deposition”, Journal of Applied Physics, 100 (2), July 2006.
  19. He, X. and J. Mazumder, “Transport Phenomena During Direct Metal Deposition”, Journal of Applied Physics, 101(5), March 2007.
  20. Egland, K. M. and J. Mazumder, “Kinetics and microstructure of laser chemical vapor deposition of titanium nitride”, Acta Materialia, Vol. 55, Issue 10, pp 3623-3631, June 2007.
  21. Lober, R. and J. Mazumder, “Spectroscopic Diagnostics of Plasma during laser processing of Aluminum”, Journal of Physics D: Applied Physics, 40(19), pp 5917-5923, October 20078. Dinda, G., L. Song and J. Mazumder, “Laser deposited Ti-6Al-4V Scaffolds for Patient Specific Bone Tissue Engineering”, Metallurgical Transactions A, 39(12), pp. 2914-2922, 2008.
  22. Dasgupta, A. and J. Mazumder,  “Physics of Zinc Vaporization and Plasma Absorption During CO2 Laser Welding”,  Journal of Applied Physics, Vol 102(5), pp. 053108-1 – 053108-15, 2008. 
  23. Mazumder, J., “Intelligent manufacturing:  Role of lasers and optics,” LIA Today, 16(4-7), 2008.
    Shin, J. L. Peng, and J. Mazumder,  “Characterization Study of Yttria-stabilized Zirconia (YSZ) Thin Films Produced by Pulsed Laser Deposition”,  Thin Solid Films, Volume 517, Issue 2, 28 November 2008, Pages 648-651.
  24. Dinda, G., Song, L. and J. Mazumder, “Fabrication of Ti-6Al-4V Scaffolds by Direct Metal Deposition”, Journal of Metallurgical and Materials Transactions A, Vol. 39, No. 12, December 2008.
  25. Kam, D. and J. Mazumder, “3-D bio-mimetic micro-channel network by laser direct writing”,  Journal of Laser Applications, Volume 20, Issue 3, pp. 185, August 2008
  26. G.P. Dinda a, b,*, A.K. Dasgupta a, J. Mazumder b Laser Aided Direct Metal Deposition of Inconel 625 Superalloy: Microstructural Evolution and Thermal Stability, Materials Science & Engineering A, vol. 509, No.1-2, pp. 98-104, 2009
  27. Dinda, G.P, Joonghan  S., J. Mazumder, Pulsed laser deposition of hydroxyapatite thin films on Ti-6Al-4V: effect of heat treatment on structure and properties, Acta Biomaterilia, Jun 5(5), pp1831-1830, January 2009.
  28. Dutta*, Baskar, Singh, V. Natu, H. Choi, J., J. Mazumder, Direct Metal Deposition, Advanced materials and Processes, pp. 29-32 March 2009.
  29. He, X; Yu, G., J. Mazumder, Temperature and composition profile during double-track laser cladding of H13 tool steel, Journal of Physics D-Applied Physics, Vol. 43, Iss. 1, Article Number 015502, 2010.
  30. Kam, D. H., Shah, L. and J. Mazumder, Femtosecond laser machining of multi-depth microchannel networks onto silicon, J. Micromech., Microeng. 21 (2011) 045027, 8 pps.
  31. Dinda, G.P., Dasgupta, A.K. and J. Mazumder, Evolution of microstructure in laser deposited Al-11.28% Si alloy, Surface and Coatings Technology, Vol. 206 (2012), 2152-2160.
  32. He, X., Song. L., Yu, G. and J. Mazumder, Solute transport and composition profile during direct metal deposition with coaxial powder injection, Applied Surface Science, Vol. 258, pp 898-907, 2011.
  33. Song, L. and J. Mazumder, Real time Cr measurement using optical emission spectroscopy during direct metal deposition process, IEEE Sensors Journal, (DOI: 10.1109/JSEN.2011.2162316).
  34. Imran, M. K., Masood, S.H., Brandt, M., Bhattacharya, S., Gulizia, S. Jahedi, M. and J. Mazumder, Thermal fatigue behavior of direction metal deposited H13 tool steel coating on copper alloy substrate, Surface and Coatings Technology, 206 (2012), 2572-2580

Conference Proceedings

  1. Mazumder J, & Huan Qi, “ Fabrication of 3-D components by Laser Aided Direct metal Deposition”,  Photonics West, January 24-27, 2005, San Jose, CA.
  2. Li, Peng, H. Ki and J. Mazumder “Modeling Laser Keyhole-Welding with Adaptive Mesh Refinement”, ICALEO, October 31- November 03, 2005, Miami, FL.
  3. Mazumder J, & Joonghan Shin, “State of the Art Review for laser Bending Process”, WALMI, held during February 02-05, 2006, Calcutta,India.
  4. Mazumder J, W. R. Morrow, H. Qi, S. J. Skerlos and B. Dutta, “Direct Metal deposition: Environmentally Friendly Enabling Technology”, PICALO, April 3-5, 2006, Melbourne, Australia.
  5. Mazumder, J. “Innovative Fabrication of Long-Life Dies and Tools by Direct Metal Deposition and Impact on Energy and Environment”, Indo-US Workshop on Rapid Manufacturing, April 17-19, 2006, Bangalore, India.
  6. Mazumder, J. and A. K. Dasgupta. “A Novel Method for Lap Welding of Automotive Sheet Steel Using High Power CW CO2 Laser”, LAMP 2006, May 15-21, 2006, Kyoto, Japan.
  7. Mazumder, J., “Art to Part by Laser Direct Metal Deposition”, PhAST 2006, May 22-25, 2006, Long Beach, CA.
  8. Dinda, G. P., L. Song, and J. Mazumder,  “Microstructure and Mechanical Properties of Laser-deposited Ti-6Al-4V Scaffold”, ICALEO 2006, October 30-November 2, 2006, Scottsdale, AZ.
  9. Kam, D., L. Shah, and J. Mazumder,  “3-D Biomimetic Micro-channel network by Laser Direct Writing”, ICALEO 2006, October 30-November 2, 2006, Scottsdale, AZ.
  10. He, X., and J. Mazumder,  “Modeling of Weld Pool Geometry and Temperature During Direct Metal Deposition”, ICALEO 2006, October 30-November 2, 2006, Scottsdale, AZ.
  11. Song, L., and J. Mazumder,  “Modeling, Sensing and Control of Direct Metal Deposition”, ICALEO 2006, October 30-November 2, 2006, Scottsdale, AZ.
  12. Shin, J., P. Li, and J. Mazumder,  “Study of the Surface Morphology and Mechanical Properties of Yttria-stabilized Xirconia (YSZ) Thin Films Fabricated by Pulsed Laser Deposition.” ICALEO 2006, October 30-November 2, 2006, Scottsdale, AZ.
  13. Dasgupta, A. K., and J. Mazumder.  “Effect of Processing Parameters on Zero-gap Laser Welds made on Zinc-coated Steel”, ICALEO 2006, October 30-November 2, 2006, Scottsdale, AZ.
  14. Dutta, B., Lewan, M., Swenson, B., Mauzmder, J., Oak, S., Lodhger, T., and Venkatram, A.,  “TPO Conformal Cooling Tooling Application”, SPE-TPO Conference, October 8-10 2007.
  15. Dinda, Guru Prasad, Shin, Joonghan, and J. Mazumder, “Microstructural Characterization of Pulsed Laser-Deposited Hydroxyapatite Thin Films on T1-AL-4V”, ICALEO 2007, October 29 – November 1, 2007, Orlando, FL.
  16. Shin, Joonghan and J. Mazumder, “Deposition of the N1-Base Superalloy Films by Pulsed Excimer Laser”, ICALEO 2007, October 29 – November 1, 2007, Orlando, FL.
  17. He, Xiuli and J. Mazumder,  “ Liquid Thermal Cycle During Double-Track Laser Cladding of H13 Tool Steel”, ICALEO 2007, October 29 – November 1, 2007, Orlando, FL.
  18. Song, Lijun and J. Mazumder, “Predictive Control for Direct Metal Deposition”, ICALEO 2007, October 29 – November 1, 2007, Orlando, FL.
  19. He, Xiuli and J. Mazumder, “Heat Transfer and Fluid Flow During Double-Track Laser Cladding of H13 Tool Steel”, Proceedings of the 3rd Pacific International Conference on Application of Lasers and Optics 2008, April 16-18, 2008, Bejing China.
  20. Song, Lijun and J. Mazumder, “Robust Sensing and Control of Direct Metal Deposition”, Proceedings of the 3rd Pacific International Conference on Application of Lasers and Optics 2008, April 16-18, 2008, Bejing China.
  21. Yao, Jianhua and Jyoti Mazumder, “Influence of Laser DMD Technics on Microstructure of Inconel 718 High-Temperature Alloy”, Proceedings of the 3rd Pacific International Conference on Application of Lasers and Optics 2008, April 16 – 18, 2008, Bejing China.
  22. Dinda, Guru Prasad, Dasgupta, Ashish and J. Mazumder, “Microstructural Studies on Inconel 625 Components Fabricated by Laser Aided Direct Metal Deposition,” Materials Science and Engineering A.
  23. Song, Lijun and J. Mazumder, “Robust Sensing and Predictive Control of Direct Metal Deposition,”ICALEO-2008
  24. Kam, DongHyuk, Shah, Lawrence and J. Mazumder, “Laser Micromachining of Micro-channel Branching Networks into Silicon with a Femtosecond Fiber Laser,” ICALEO 2008, October 20-23, 2008, Temecula, CA.
  25. Deus, Augusto and J. Mazumder, “A Simple Approach for the Estimation of Dilution in Laser Cladding,” XVII International Symposium on Gas Flow and Chemical Lasers & High Power Lasers 2008, Lisbon, Portugal, September 15-19, 2008.
  26. Choi, J., Dutta, B. and J. Mazumder, “Spatial Control of Crystal Texture by Laser DMD Process,” TMS (The Minerals, Metals and Materials Society) 2009 Supplemental Proceedings, Vol. 1, pg. 405-412.
  27. Dutta, B., Natu, H. and J. Mazumder, “Near net shape repair and remanufacturing of high value components using DMD,” (The Minerals, Metals and Materials Society) 2009 Supplemental Proceedings, Vol. 1, pgs.  131-138.
  28. Bhattacharya, S. and J. Mazumder, “Characterization of AISI 4340 steel formed by Direct Metal Deposition process,” TMS-2010.
  29. Chae, H. M. and J. Mazumder, “Residual Stress Modeling in DMD Process using Numerical Heat Transfer/Fluid Flow and Kinetics of Phase Transformation,” ICALEO 2009, Nov. 2-5, 2009, Orlando, FL, USA.
  30. Lee, S. H. and J. Mazumder, “Spectroscopic Measurements of Plasma Plume for Welding Monitoring, ” ICALEO 2009, Nov. 2-5, 2009, Orlando, FL, USA.
  31. Shin, J. and J. Mazumder, “Spectroscopic Study of Inconel 718 Plasma Generated during Laser Drilling Process,” ICALEO 2009, Nov. 2-5, 2009, Orlando, FL, USA.
  32. Song, L. and J. Mazumder, “Composition Analysis During Direct Metal Deposition Process by Investigation of Laser Induced Plasma,” ICALEO 2009, Nov. 2-5, 2009, Orlando, FL, USA.
  33. Venkannah, S., and J. Mazumder, “Changes in Laser Weld Bead Geometry with the Application of Ultrasonic Vibrations”, World Congress on Engineering 2009, Vols. I and II, Pages 1612-1617, 2009.
  34. Venkannah, S., and J. Mazumder, “The Effect of Ultrasound on the Microhardness and Nanohardness of Laser Welds in Mild Steel,” World Congress on Engineering 2009, Vols. I and II, Pages 1653-1657, 2009.
  35. Kam, D., Song, L., and J. Mazumder, “Modeling and measurement of fs to CW laser materials process”, The 5th International Congress on Laser Advanced Materials Processing, Kobe, Japan, 2009.
  36. Pipe, L., Liu, Y., Roessler, D. and J. Mazumder, “High-Brightness Nd:YAG Laser Welding of Aluminum 5754,” TMS-2010.
  37. Song, L. and J. Mazumder, “Advances in Direct Metal Deposition,” 36th MATADOR Conference, The University of Manchester, Manchester, Great Britain, 7/14-16, 2010.
  38. Imran, M., Masood, S., Brandt, M., Bhattacharya, S., and J. Mazumder, “Parametric Investigation of Diode and CO2 Laser in Direct Metal Deposition of H13 Tool Steel on Copper Substrate,” LiM 2011, Feb. 7th, 2011, Erlangen, Germany.
  39. Chae, H.M., J. Mazumder, Numerical Modeling of Direct Metal Deposition:  Heat Transfer/Solute Transport of Ternary System, Proc. 29th Int. Congress on Application of Lasers and Electro-Optics 2010, Sept. 27-30, Anaheim, CA.
  40. Lijun Song, Jyoti Mazumder, Composition analysis during direct metal deposition process by investigation of laser induced plasma, ICALEO 2010,  Sept. 27-30, Anaheim, CA.
  41. Lee, S. H, J. Mazumder, In-Situ Defect Detection during Laser Welding of Sheet Metals, Sheet Metal Welding Conference XIV, May 11-14, 2010, Livonia, MI.
  42. Lee, S. H., J. Mazumder, Characteristics of Disk Laser-Induced Plasma, 2010.
  43. Chae, H.M., J. Mazumder, Effects of melt pool size on transient and residual stress in DMD process, ICALEO, 2011, Oct. 23-27, 2011, Orlando, FL.
  44. Dutta, B., Singh, V., Choi, J., Song, L., and J. Mazumder, “Net Shape Components with Combined Additive and Subtractive Manufacturing,” Materials Science & Technology 2010, Houston, TX.